field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Howmet Fastening Systems is looking for a Processing Technician II in our Heat Treat department.&nbsp; This role is responsible for operating all equipment to perform heat treating, plating, wastewater treatment, or waste oil treatment processes.&nbsp; The position will perform quality checks and complete production work orders and/or related documents. When performing any tasks involving hazardous chemicals or hazardous waste, the Processing Technician II will follow the regulations and requirements of SPCC Plan, RCRA regulations and operating procedures involving hazardous chemicals outlined in the Huck Fasteners Environmental management.&nbsp;This position will be based in our Waco, TX plant. Responsibilities: <ul><li>Operate mechanical and electro-plating equipment, and other metal finishing processes, and be familiar with plating methods and metal finishing procedures.</li><li>Must be able to read charts and graphs and follow instructions closely.</li><li>Must have working knowledge of measuring equipment and accurately weigh and mix chemicals per instructions.</li><li>Control pollution treatment tanks per instructions.</li><li>Must be able to read charts and graphs.</li><li>Perform job duties in compliance with quality standards.</li><li>Responsible for the proper care and maintenance of equipment.</li><li>Read charts and graphs and follow instructions closely with minimal supervision.</li><li>Follow instructions closely.</li><li>Keep work area clean and orderly.</li><li>Wear safety equipment as required and work safely at all times.</li><li>Ensure that all work activities are performed in accordance with established safety and environmental standards.</li><li>Make out production reports, timecards and other reports or forms as required.</li><li>Operators of power equipment will be responsible for checking oil, water, fuel, etc. before and during the operation of said equipment.</li><li>Maintain full compliance with Company policies and procedures and conducts all activities in accordance with the&nbsp;Howmet Code of Conduct.</li><li>Demonstrate a knowledge of and commitment to lean manufacturing principles and techniques. Performs all work activities in accordance with safety and environmental standards.</li><li>Perform other duties as assigned.</li><li>When performing any tasks involving hazardous chemicals or hazardous waste, follow the regulations and requirements of RPCC Plan, SPCC Plan, RCRA regulations and operating procedures involving hazardous chemicals outlined in the Environmental management.</li></ul> Qualifications&nbsp; <ul><li>High school diploma or equivalent</li><li>Minimum of 1 year in an industrial environment</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. &nbsp;ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.</li></ul> Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Processing Technician II - Heat Treat

Howmet Fastening Systems is looking for a Production Technician III in our Small Products factory. &nbsp;This position is responsible for the production of parts meeting print and specification requirements.&nbsp; Also responsible for the care and maintenance of equipment.&nbsp; Must function as a tooling readiness specialist when directed by the Manufacturing Supervisor.&nbsp; Train other operators, as required.&nbsp; Must show by example a commitment to continuous improvement. This position will be based in our Waco, TX plant. Responsibilities: <ul><li>Operation of assigned equipment following standard work to include loading inputs, e.g.; wire, headed parts, etc.</li><li>Perform statistical process control measurements and calculations.&nbsp; Complete forms or computer entries regarding those measurements and calculations as required.</li><li>Perform general housekeeping tasks which ensures the work area is neat, clean, orderly and adheres to 5S principles.</li><li>Accurately and thoroughly prepare daily production reports and forms.</li><li>Participate in identifying, implementing and communicating improvement opportunities in assigned work tasks.&nbsp;</li><li>Perform machine inspections including daily, weekly and monthly preventative maintenance tasks.</li><li>Enter electronic maintenance requests for machine repairs.</li><li>Participate in setting and achieving team and individual productivity and quality targets.</li><li>Ensure that all work activities are performed in accordance with established safety and environmental standards.</li><li>Maintains full compliance with Company policies and procedures and conducts all activities in accordance with the Howmet Guide to Business Conduct.</li><li>Demonstrates a knowledge of and commitment to lean manufacturing principles and techniques.</li><li>Performs all work activities in accordance with safety and environmental standards.&nbsp;</li><li>Performs other duties as assigned.</li></ul> Skills: <ul><li>Mechanical skill and aptitude as demonstrated through prior jobs or hobbies.&nbsp;</li><li>Ability to learn to read and interpret product prints.</li><li>Ability to learn to use inspection gages and instruments.</li><li>Ability to learn to read and understand production documents such as routers, work instructions, and quality standards.</li><li>Ability to perform accurate arithmetic calculations.</li></ul> Qualifications: <ul><li>High school graduate or equivalent</li><li>Minimum 3 years' experience in complex mechanical work&nbsp;</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status.&nbsp; ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.</li></ul> Benefits: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays, and vacation. The salary range for this position is from $22.06 - $29.79 per hour. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Production Technician III - Small

Howmet Fastening Systems is looking for a Materials Technician II for 3rd shift to join our Waco, TX team.This position performs all tasks performed by Material Tech I &amp; II consisting of: coordination and movement of materials within the packaging operations and other areas as required; packaging, labeling, and loading product for shipment; accepting, verifying, and recording of incoming materials and supplies from outside vendors; physically lift, place, and carry items weighing up to fifty (50) pounds for moderate distances.&nbsp; &nbsp; Responsibilities: <ul><li>Operate equipment and perform duties as related to functional area of assignment, listed below, and be familiar with safety, environmental, and emergency procedures for equipment in that functional area.</li><li>Review work orders to determine customer specific packaging and labeling requirements for work in process.</li><li>Setup and run box erector/gluer, packaging machines, label printer/applicators, palletizers and stretch wrapping machines.</li><li>Accurately input data into computer systems to record production quantities through work order completions.</li><li>Take appropriate action to correct identified inaccuracies.</li><li>Operate forklift and other material handling equipment to load, unload, and transport material to designated locations in a safe and efficient manner.</li><li>Load stock into trailers or staging areas in accordance with inbound advice instructions, verifying accuracy of system data.</li><li>Load packaging lines/hoppers with forklift for packaging operations.</li><li>Ability to troubleshoot and perform minor repairs to production equipment.</li><li>Numerous miscellaneous general warehouse tasks, including 5s tasks/activities and dept improvements.</li><li>Ensures that all electronic and manual transactions are completed with a high degree of accuracy.</li><li>Performs inbounding operations of completed finished goods work orders.</li><li>Demonstrates a knowledge of and commitment to learn manufacturing principles and techniques.</li><li>Ensure that all work activities are performed in accordance with established safety and environmental standards.</li><li>Maintains full compliance and conducts all activities in accordance with Company policies and procedures.</li><li>Performs other duties as required.</li></ul> Qualifications: <ul><li>High School Diploma or equivalent.</li><li>Minimum one (1) year experience in warehouse or packaging operations.</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li><li>Must be able to read, write and accurately perform routing math calculations.</li><li>Must be able to interact positively with other individuals to function effectively in a team-based environment.</li><li>Must have mechanical aptitude and ability.</li><li>Must be able to operate basic computer systems and programs.</li><li>Must be able to learn computer-based applications and equipment.</li></ul> Benefits: &nbsp;The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $15.25 - $19.06 / hour. About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Materials Technician II - Packaging (3rd Shift)

Howmet Fastening Systems is looking for a Materials Technician II (2nd Shift) in our Shipping Department.&nbsp; This position is responsible for the coordination and movement of materials within the packaging operations and other areas as required. Responsibilities: <ul><li>Operate equipment and perform duties as related to functional area of assignment, listed below, and be familiar with safety, environmental, and emergency procedures for equipment in that functional area.</li><li>Provide backup to the Shipping Coordinator</li><li>Review W.O. to determine the next procedure to process product and communicate with respective area that they have material.</li><li>Setup and run inventory scale and dumping apparatus. &nbsp;</li><li>Accurately input data into computer systems to record production quantities through work order completions.</li><li>Take appropriate action to correct identified inaccuracies.</li><li>Operate forklift and other material handling equipment to load, unload, and transport material to designated locations in a safe and efficient manner.</li><li>Load stock into trailers or staging areas in accordance with inbound advice instructions, verifying accuracy of system data.</li><li>Load packaging lines/hoppers with forklift for operations.</li><li>Ability to troubleshoot and perform minor repairs to equipment.</li><li>Numerous miscellaneous general warehouse tasks, including 5s tasks/activities and dept improvements.</li><li>Demonstrates a knowledge of and commitment to learn manufacturing principles and techniques.</li><li>Ensures that all electronic and manual transactions are completed with a high degree of accuracy.</li><li>Performs inbounding operations of completed finished goods W.O.’s</li><li>Cross training on all department equipment</li><li>Ensure that all work activities are performed in accordance with established safety and environmental standards.</li><li>Maintains full compliance and conducts all activities in accordance with Company policies and procedures.</li><li>Performs other duties as required.</li></ul> Skills: <ul><li>Must be able to read, write and accurately perform routing math calculations.</li><li>Must be able to interact positively with other individuals to function effectively in a team-based environment.</li><li>Must have mechanical aptitude and ability.</li><li>Must be able to operate basic computer systems and programs.</li><li>Must be able to learn computer-based applications and equipment.</li><li>Ability to perform tasks accurately and efficiently with little guidance.</li><li>Ability to work in an organized manner to ensure Quality standards are met.</li></ul> Physical Demands: <ul><li>Carrying items up to fifty (50) pounds for moderate distances.</li><li>Abundance of sitting due to amount of forklift driving necessary.</li><li>Need to be able to perform at a high rate while paying attention to detail.</li></ul> Qualifications: <ul><li>High School Diploma or equivalent.</li><li>Minimum one year experience in warehouse or packaging operations.</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. &nbsp;ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.</li></ul> Benefits: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $15.25 - $19.06. About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Materials Technician II - Shipping (2nd Shift)

Howmet Fastening Systems is looking for an EHS Technician to join our Waco team. &nbsp;This role is responsible for maintaining various Environmental, Health, and Safety (EHS) programs, policies, and procedures within the multiple areas in the Metal Finishing department. Responsibilities: <ul><li>Assist in EHS ASAT audits and testing.</li><li>Develop, maintain, and perform training on EHS programs, policies, and procedures.</li><li>Perform responsibilities in maintaining various EHS policies and procedures.&nbsp;</li><li>Assist in Problem Solving A3s dealing with EHS issues.</li><li>Monitor contractor adherence to EHS programs, policies, and procedures.</li><li>Provide resources, and act as a resource, for program managers/teams, and plant employees, as needed for EHS issues.</li><li>Perform monthly EHS department inspections/audits internally.</li><li>Perform and assist in company EHS external audits.&nbsp;</li><li>Develop audit tools.</li><li>Develop and conduct monthly safety training; as well as, conducting toolbox meetings as necessary.</li><li>Complete training on related EHS topics, as necessary.</li><li>Ensure, and assist in, the completion of PEHSRs, as related to EHS.</li><li>Prepare Triple Is and follow up on near-misses and first-aid incidents.</li><li>Perform incident investigation for incident root cause analysis.</li><li>Assist the location’s CIH with exposure assessments and monitoring.</li><li>Assess PPE requirements and assist in PPE selection, including, the completion of hazard assessments.</li><li>Ensuring that all chemicals in the departments have been identified and ensuring that the MSDS is maintained in Dolphin.&nbsp; Labeling all chemical containers, as needed.</li><li>Ensure that all work activities are performed in accordance with established safety and environmental standards.</li><li>Maintains full compliance and conducts all activities in accordance with Company policies and procedures.</li><li>Requires occasional on-call availability outside of regular business hours.&nbsp;</li><li>Ensure that all work activities are performed in accordance with established safety and environmental standards.</li><li>Maintains full compliance and conducts all activities in accordance with Company policies and procedures.</li><li>Performs other duties as required.</li></ul> Skills: <ul><li>Computer skills to include a working knowledge of Office 365, Word, Excel, Outlook, Power Point, and Lotus Notes.&nbsp; Knowledge of other software is a plus.</li><li>Solid interpersonal skills to interact effectively with people throughout the organization.</li><li>Ability to develop and conduct training programs and informational presentations on a variety of EHS topics.</li><li>Ability to conduct presentations and hands-on training to a group.</li><li>Good writing skills to develop a wide range of documents.</li><li>Good verbal communication skills.&nbsp;</li><li>Experience with problem solving, able to think through a problem or reach a solution in a timely manner.&nbsp;</li></ul> Basic Qualifications: &nbsp; <ul><li>High school diploma or equivalent.</li><li>Minimum 2 years environmental and safety in a manufacturing environment with familiarity with OSHA standards, particularly general industry safety regulations OR 3 years of experience through an environmental and safety program. </li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status.&nbsp; ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.</li></ul> Benefits: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays, and vacation. About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

EHS Technician

Howmet Fastening Systems is looking for a Production Technician III in our Large Products Department.&nbsp; This position is responsible for the production of parts meeting print and specification requirements.&nbsp; Also responsible for the care and maintenance of equipment. Must function as a tooling readiness specialist when directed by the Manufacturing Supervisor. Train other operators, as required. Must show by example a commitment to continuous improvement.&nbsp;This position will be based in our Waco, TX plant. Key Responsibilities: <ul><li>Maintains full compliance with Company policies and procedures and conducts all activities in accordance with the company Code of Conduct. Production of parts meeting drawing and specification requirements.</li><li>Set-up and operation of equipment, as assigned.</li><li>Perform statistical process measurements / calculations.&nbsp; Complete forms / computer entries as required.</li><li>Order and maintain inventory levels of required tooling, gages and supplies.</li><li>Participate in assuring team tooling and material readiness.&nbsp; (Assemble tooling set-up kits, stage raw materials and perform external setup tasks, as required)</li><li>Participate in setting and achieving team and individual productivity and quality targets.</li><li>Participate with team in continuous improvement efforts.</li><li>Perform machine inspections including daily, weekly and monthly preventative maintenance tasks.</li><li>Perform shop floor housekeeping duties.</li><li>Prepare daily production reports and forms.</li><li>Train other operators as required.</li><li>Ensure that all work activities are performed in accordance with established safety and</li><li>Maintains full compliance with Company policies and procedures and conducts all activities in accordance with the company Guide to Business Conduct.</li><li>Demonstrates a knowledge of and commitment to learn manufacturing principles and techniques.</li><li>Performs all work activities in accordance with safety and environmental standards.</li><li>Performs other duties as assigned.</li></ul> Qualifications: <ul><li>High School or Equivalent</li><li>Minimum 3 years’ experience in complex mechanical work</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul> Benefits: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $22.06 - $29.79 per hour. About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Production Technician III - Large Products (2nd & 3rd Shifts)

Job Summary: Howmet Fastening Systems is looking for a Machining Technician I, 3rd shift, to join our Waco, TX team. &nbsp;This role is responsible for working with close tolerances, setting up and operating a variety of manual and/or CNC metal cutting machines. The position will read and interpret blueprints, engineering sketches, and diagrams and produce items for a variety of applications. Responsibilities and Duties: <ul><li>Set up and operate a variety of manual and/or CNC metal cutting machines such as mills, lathes, grinders, and related equipment.</li><li>Produce items including; tooling for production machines, repair parts, installation tooling parts, and fastener prototypes.</li><li>Read and interpret blueprints and sketches to determine specifications of items to be produced.</li><li>Read gages, micrometers, scales, calipers and related precision measuring equipment to determine item conformance to specifications.</li><li>Perform work to dimensional tolerances.</li><li>Perform routine maintenance and adjustments on machine tools and equipment.</li><li>Maintain a clean and orderly work area in accordance with 5-S principles.</li><li>Perform all work activities in accordance with safety and environmental standards.</li><li>Provide hand tools required for performance of assigned duties.</li><li>Maintains full compliance with Company policies and procedures and conducts all activities in accordance with the Howmet Guide to Business Conduct.</li><li>Demonstrates a knowledge of and commitment to lean manufacturing principles and techniques.</li><li>Performs all work activities in accordance with safety and environmental standards.</li><li>Perform other duties as assigned.</li></ul> Knowledge and Skills: <ul><li>Good communication skills &amp; knowledge of basic shop math</li><li>Ability to read, write and understand basic instructions in English</li></ul> Basic Qualifications: <ul><li>High school diploma or GED</li><li>Minimum of 6 months of experience utilizing machine tools to perform precision metal cutting operations.&nbsp; This may include Technical school education.</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul> Preferred Qualifications: <ul><li>Technical school education in machining</li></ul> Benefits: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays, and vacation. &nbsp;Salary Range for this position is $21.45 - $26.81 per hour. The above statements are intended to describe the general nature and level of work being performed.&nbsp; They are not intended to be an exhaustive list of all responsibilities, duties and skills required of incumbents in this job classification. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Machining Technician I - Tool Room (3rd Shift)

Howmet Fastening Systems in Waco is looking for a Production Technician II in our Blind&nbsp;Products Department.&nbsp; This role is responsible for the production of parts meeting print and specification requirements, as well as the care and maintenance of equipment. The position must function as a tooling readiness specialist when directed by the Manufacturing Supervisor, train other operators, as required, and must show by example a commitment to continuous improvement. Key Responsibilities: <ul><li>Production of parts meeting drawing and specification requirements.</li><li>Set-up and operation of equipment, as assigned.</li><li>Perform statistical process control measurements and calculations. Complete forms or computer entries as required.</li><li>Order and maintain inventory levels of required tooling, gages and supplies.</li><li>Participate in assuring team tooling and material readiness. (Assemble tooling set-up kits, stage raw materials and perform external setup tasks, as required)</li><li>Participate in setting and achieving team and individual productivity and quality targets.</li><li>Participate with team in continuous improvement efforts.</li><li>Perform machine inspections including daily, weekly and monthly preventative maintenance tasks.</li><li>Perform shop floor housekeeping duties.</li><li>Prepare daily production reports and forms.</li><li>Train other operators as required.</li><li>Ensure that all work activities are performed in accordance with established safety and environmental standards.</li><li>Maintains full compliance with Company policies and procedures and conducts all activities in accordance with the Arconic Code of Conduct.</li><li>Demonstrates a knowledge of and commitment to lean manufacturing principles and techniques.</li><li>Performs other duties as assigned.</li></ul> Minimum Qualifications: <ul><li>High school diploma or GED</li><li>Minimum of 2 years mechanical experience</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. &nbsp;ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.</li></ul> Benefits: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range is $19.83 - $24.79 per hour. About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Production Technician II - Blind Products (2nd Shift)

Howmet Fastening Systems is looking for a Production Technician II in our Large Products Department. &nbsp;This position is responsible for the production of parts meeting print and specification requirements. Responsibilities: <ul><li>Production of parts meeting drawing and specification requirements.</li><li>Set-up and operation of equipment, as assigned.</li><li>Perform statistical process control measurements and calculations.&nbsp; Complete forms or computer entries as required.</li><li>Order and maintain inventory levels of required tooling, gages and supplies.</li><li>Participate in assuring team tooling and material readiness.&nbsp; (Assemble tooling set-up kits, stage raw materials and perform external setup tasks, as required)</li><li>Participate in setting and achieving team and individual productivity and quality targets.</li><li>Participate with team in continuous improvement efforts.</li><li>Perform machine inspections including daily, weekly and monthly preventative maintenance tasks.</li><li>Perform shop floor housekeeping duties.</li><li>Prepare daily production reports and forms.</li><li>Train other operators as required.</li><li>Ensure that all work activities are performed in accordance with established safety and environmental standards.</li><li>Maintains full compliance with Company policies and procedures and conducts all activities in accordance with the Howmet Guide to Business Conduct.</li><li>Demonstrates a knowledge of and commitment to learn manufacturing principles and techniques.</li><li>Performs all work activities in accordance with safety and environmental standards. Performs other duties as assigned.</li></ul> Skills: <ul><li>Ability to set-up and operate multiple equipment types (pin heading, sleeve heading, pin rolling, band annealing, drilling and/or assembly.)&nbsp; Ability to train operators in equipment set-up and operation.</li><li>Ability to read and interpret product blueprints.</li><li>Ability to use inspection gages and instruments.</li><li>Good communications and interpersonal skills.</li><li>Demonstrated commitment to continuous improvement. </li></ul> Qualifications: <ul><li>High school graduate preferred or equivalent combination of education and experience.&nbsp;</li><li>Minimum of 2 years of experience performing moderately complex mechanical work.</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul> Benefits: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $21.45 - $26.81. About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

9 Technician Jobs in Waco, TX, USA