field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Description Idaho National Laboratory is hiring a Health Physics Technician to work in our Radiological Controls Operations department. Our team works a 4x10 (schedule options may vary between 4-10's, 4-12's, 5x5x4, or rotating shift schedule) located out of our MFC facility with every Friday off. You will report to Radiological Control Fields Manager. You will perform routine and special radiological control surveys of areas, materials, and personnel. Monitor shipments, disposal, and/or storage of radioactive materials. Calculate amount of time personnel may be safely exposed to radiation. Calibrate and maintain adequate inventories of portable and/or fixed radiation monitoring and personnel protective equipment. Review design, procurement, and/or work authorization documents for accuracy and completeness concerning safety requirements. Identify potential problem areas and apply necessary corrective measures. Perform material/fabrication/installation inspections to verify safety requirements are met. Responsibilities Include: <ul><li>Provide radiological work coverage, radiological work/practices oversight and mentoring: enforce radiological control requirements, ensure ALARA principles are followed during work and respond to radiological emergencies.</li><li>Apply a basic knowledge of different radiological control principles, procedures, requirements, and related instrumentation sufficient to monitor for radiation, contamination and airborne radioactivity in the workplace. Ensure compliance with radiological safety requirements.</li><li>Ensure compliance with radiological safety requirements.</li><li>Review, evaluate and comply with radiological work permits.</li><li>Document and review when applicable, radiological surveys and radiological information in logs and survey maps.</li><li>Provide input for radiation safety related improvements to facility procedures concerning radiation control and ALARA implementation. Recommend additional training or changes to radiological control procedures to correct deficiencies.</li><li>Perform required radiological surveys for free release of materials; personnel surveys for contamination; surveys for contamination control, radiation control and worker exposure, airborne radioactivity control; and surveys to categorize waste for shipment.</li><li>Issue "time out" and "stop-work" orders.</li><li>Mentor radiological workers.</li></ul>Qualifications Minimum Requirements: <ul><li>Level 1: High School or equivalent and 0-18 months of RadCon experience.</li><li>Level 2: High School or equivalent and 18+ months of RadCon experience.</li><li>Must either be currently DOE Core qualified or successfully pass the DOE Core exam administered by BEA prior to start date.</li><li>Must be able to obtain and maintain qualification as a INL Technician within 1 year of start date.</li><li>Technical/Vocational certification or formal course completion in Radiation Protection/Safety.</li><li>This position requires the ability to obtain and maintain a Department of Energy "Q" clearance, which requires US Citizenship.</li></ul> Job Information: <ul><li>The pay range for this position is: Level 1 (min $22.43 - max $37.00) / Level 2 (min $25.79 - max $42.54). At Idaho National Laboratory compensation decisions are determined using factors such as education, relevant experience, and other credentials.</li><li>You are required to show a demonstrated commitment to valuing diversity and contributing to an inclusive working environment.</li><li>TDP: This is a testing designated position; you will be required to submit to a pre-employment drug screen and periodic drug testing throughout the term of your employment.</li><li>Multi-Level: This is a multi-level posting and you will be placed at the appropriate level dependent on depth and breadth of proven experience and skills.</li></ul> Benefits and Relocation <ul><li>Medical, Dental, Vision, and Flexible Spending Accounts</li><li>401(k) with a 4.2% employer contribution and up to 4.8% match</li><li>Paid time off (personal leave)</li><li>Employee Education Program (tuition assistance)</li><li>Benefit eligibility subject multiple factors, including employment status and position classification.</li></ul> INL is a science-based, applied engineering national laboratory dedicated to supporting the U.S. Department of Energy's mission in nuclear energy research, science, and national defense. With more than 5,000 scientists, researchers, and support staff, the laboratory works with national and international governments, universities and industry partners to discover new science and development technologies that underpin the nation's nuclear and renewable energy, national security, and environmental missions. INL Mission Our mission is to discover, demonstrate and secure innovative nuclear energy solutions, other clean energy options and critical infrastructure. INL Vision Our vision is to change the world's energy future and secure our nation's critical infrastructure. Selective Service Requirements To be eligible for employment at INL males born after December 31, 1959 must have registered with the Selective Service System (SSS). For more information see <a href="http://www.sss.gov" target="_blank">www.sss.gov</a>. Equal Employment Opportunity Idaho National Laboratory (INL) is an Equal Employment Opportunity (EEO) employer. It is the policy of INL to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Women and People of Color are strongly encouraged to apply. Reasonable Accommodation We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Other Information When applying to positions please provide a resume and answer all questions on the following screens. Applicants, who fail to provide a resume or answer the questions, may be deemed ineligible for consideration. INL does not accept resumes from third party vendors unsolicited.

Idaho National Laboratory

Health Physics Technician

Description Idaho National Laboratory is hiring a Fabrication Welding and Design Technician to work in our REC Fabrication Services department. Our team works a 9x80 schedule located out of our Research and Education Campus with every other Friday off. You will perform precision welding processes as a certified welder using numerous AWS and ASME welding procedures. You will report directly to the manager of the REC Fabrication Services department. Responsibilities Include: <ul><li>Perform a wide scope of technical assignments with advanced skills as a Welder/Fabricator and a design consultant.</li><li>Work with members of the engineering and scientific community to weld assemblies, equipment, and components, using various types of welding equipment.&nbsp; Collaborate directly with engineering, designers and scientific researchers to help resolve technical welding/fabrication issues.</li><li>Read and interpret drawings and sketches proficiently, review designs with customers to help define job requirements, offer recommendations for improving product design.&nbsp; Resolve problems and ensure customer satisfaction.</li><li>Provide status of jobs in process to management and customers.</li><li>Consistently and reliably operate mills, lathes, brakes, rolls, laser cutters, plasma cutters, water cutting equipment, (both manual and CNC), and other fabrication shop tools to perform close tolerance precision fabrication activities.</li><li>Must be capable in programming, posting, and operating Mastercam or a similar CAD/CAM system to create precise work.</li><li>Routinely assume leadership role on projects.</li><li>Perform on the job (OJT) instruction training for qualification of other technicians.&nbsp; Mentor other shop staff.</li><li>Help maintain compliance to all safety, industrial hygiene, environmental, and quality assurance requirements.&nbsp;</li><li>Maintain good housekeeping practices by keeping work areas clean and organized.</li></ul>Qualifications Minimum Requirements:&nbsp; <ul><li>High school diploma, or equivalent, and 6 years of relevant experience. Relevant experience includes related work experience, vocational certification, associate's degree, or trade apprenticeship.&nbsp;</li><li>Must have and demonstrate expert skills in the welding and fabrication process and be experienced in the use of the latest major fabrication shop equipment.</li><li>Must be capable in programming, posting, and operating Mastercam or a similar CAD/CAM system to create precise work.</li><li>Experience in welding, fabrication, machining, and quality assurance is required.</li><li>Experience interpreting tolerances and GD&amp;T inspection requirements is required.</li></ul> Job Information:&nbsp; <ul><li>The pay range for this position is $35.30/hr - $58.23/hr.. At Idaho National Laboratory compensation decisions are determined using factors such as education, relevant experience, and other credentials.</li><li>You are required to show a demonstrated commitment to valuing diversity and contributing to an inclusive working environment.</li></ul> Benefits: <ul><li>Medical, Dental, Vision, and Flexible Spending Accounts</li><li>401(k) with a 4.2% employer contribution and up to 4.8% match</li><li>Paid time off (personal leave)</li><li>Employee Education Program (tuition assistance)</li><li>Benefit eligibility subject multiple factors, including employment status and position classification.</li></ul> INL is a science-based, applied engineering national laboratory dedicated to supporting the U.S. Department of Energy’s mission in nuclear energy research, science, and national defense. With more than 5,000 scientists, researchers, and support staff, the laboratory works with national and international governments, universities and industry partners to discover new science and development technologies that underpin the nation’s nuclear and renewable energy, national security, and environmental missions. INL Mission Our mission is to discover, demonstrate and secure innovative nuclear energy solutions, other clean energy options and critical infrastructure. INL Vision Our vision is to change the world’s energy future and secure our nation’s critical infrastructure. Selective Service Requirements To be eligible for employment at INL males born after December 31, 1959 must have registered with the Selective Service System (SSS). For more information see <a href="http://www.sss.gov" target="_blank">www.sss.gov</a>. Equal Employment Opportunity Idaho National Laboratory (INL) is an Equal Employment Opportunity (EEO) employer. It is the policy of INL to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Women and People of Color are strongly encouraged to apply.&nbsp; Reasonable Accommodation We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Other Information When applying to positions please provide a resume and answer all questions on the following screens. Applicants, who fail to provide a resume or answer the questions, may be deemed ineligible for consideration. INL does not accept resumes from third party vendors unsolicited.

Fabrication Welding and Design Technician

Description Idaho National Laboratory is hiring a Precision Fabrication and Design Technician to work in our REC Fabrication Services department. Our team works a 9x80 schedule located out of our Research and Education Campus with every other Friday off. You will fabricate, modify, assemble, adjust, and test components and assemblies to specific tolerances and design criteria to support engineering projects.. You will report directly to the manager of the REC Fabrication Services department. Responsibilities Include: <ul><li>Operate mills, lathes (manual and Computer Numerical Controlled (CNC)), and other machine shop equipment consistently and reliably to perform close tolerance precision machining and fabrication activities.&nbsp;Develop CNC programs.&nbsp;</li><li>Work with members of engineering and research groups in fabrication and assembly of components.&nbsp;</li><li>Document fabrication and quality related information in work packages. Provide accurate estimates of shop work and maintain the accuracy of work packages by ensuring documentation of activities as the work is completed.&nbsp;</li><li>Read and interpret drawings and sketches proficiently. Review designs with customers to help define job requirements, offer recommendations for improving product design, fabrication, testing, and assembly.&nbsp;</li><li>Work to drawings, schematics, and work specifications to produce successful outcomes using modern techniques and tools of the trade.</li><li>Provide status on jobs in progress to project leaders and management.&nbsp;</li><li>Communicate directly with engineering, designers, and scientific researchers to help resolve technical fabrication issues while at times functioning as a lead over the shop when directed by line management.&nbsp;</li><li>Resolve problems and ensure customer satisfaction.</li><li>Perform On-the-Job (OJT) instruction training for qualification of other work disciplines.</li></ul>Qualifications Minimum Requirements:&nbsp; <ul><li>Level 3: High school diploma, or equivalent, and 4 years of relevant experience.</li><li>Level 4: High school diploma, or equivalent, and 6 years of relevant experience.</li><li>Relevant experience includes related work experience, vocational certification, associate's degree, or trade apprenticeship.&nbsp;</li><li>Must have and demonstrate expert skills in the fabrication process and be experienced in the use of major machine shop equipment.</li><li>Must be proficient in programing, posting, and executing Mastercam or comparable CAD/CAM systems in 4 or more axis.</li><li>Must be able to process a DXF drawing and solid model format through a CAM system to create machine code.</li><li>Experience in CNC machining, fabrication, and quality assurance is required.</li><li>Experience interpreting tolerances and GD&amp;T inspection requirements is required.</li><li>This position requires the ability to obtain and maintain a Department of Energy "Q" clearance, which requires US Citizenship.&nbsp;</li></ul> Job Information:&nbsp; <ul><li>The pay range for this position is: Level 3 ($30.17/hr - $49.78/hr) / Level 4 ($35.30/hr - $58.23/hr). At Idaho National Laboratory compensation decisions are determined using factors such as education, relevant experience, and other credentials.</li><li>You are required to show a demonstrated commitment to valuing diversity and contributing to an inclusive working environment.</li><li>TDP: Testing Designated Position; You will be required to submit to a pre-employment drug screen and periodic drug testing throughout the term of your employment.</li><li>Multi-Level: This is a multi-level posting and you will be placed at the appropriate level dependent on depth and breadth of proven experience and skills.</li></ul> Benefits: <ul><li>Medical, Dental, Vision, and Flexible Spending Accounts</li><li>401(k) with a 4.2% employer contribution and up to 4.8% match</li><li>Paid time off (personal leave)</li><li>Employee Education Program (tuition assistance)</li><li>Benefit eligibility subject multiple factors, including employment status and position classification.</li></ul> INL is a science-based, applied engineering national laboratory dedicated to supporting the U.S. Department of Energy’s mission in nuclear energy research, science, and national defense. With more than 5,000 scientists, researchers, and support staff, the laboratory works with national and international governments, universities and industry partners to discover new science and development technologies that underpin the nation’s nuclear and renewable energy, national security, and environmental missions. INL Mission Our mission is to discover, demonstrate and secure innovative nuclear energy solutions, other clean energy options and critical infrastructure. INL Vision Our vision is to change the world’s energy future and secure our nation’s critical infrastructure. Selective Service Requirements To be eligible for employment at INL males born after December 31, 1959 must have registered with the Selective Service System (SSS). For more information see <a href="http://www.sss.gov" target="_blank">www.sss.gov</a>. Equal Employment Opportunity Idaho National Laboratory (INL) is an Equal Employment Opportunity (EEO) employer. It is the policy of INL to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Women and People of Color are strongly encouraged to apply.&nbsp; Reasonable Accommodation We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Other Information When applying to positions please provide a resume and answer all questions on the following screens. Applicants, who fail to provide a resume or answer the questions, may be deemed ineligible for consideration. INL does not accept resumes from third party vendors unsolicited.

Precision Fabrication and Design Technician (Machinist)

CDL-A Delivery Truck Driver - Experience Required Tired of working 60 hours a week? Ready to get your work done and go home, while earning a great income? Our delivery drivers average 47 hours a week and work 4-day schedules. McLane promotes earning, learning, and living a great life. We are a team, and we want to work with you. So, here's the details: <ul><li>Pay Rate: Drivers make up to $110,000 per year.</li><li>Sign-on bonus: Up to $15,000, depending on experience.</li><li>Day 1 Benefits available: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance. </li><li>401(k) Profit Sharing Plan after 90 days.</li><li>Paid holidays, vacation time, sick leave accrual, educational assistance program, and more!</li></ul> MINIMUM QUALIFICATIONS &amp; REQUIREMENTS: <ul><li>At least 21 years of age.</li><li>Valid Class A commercial driver's license (CDL-A).</li><li>At least 1 year or 50,000 verifiable miles of tractor trailer driving experience.</li><li>Must meet McLane's MVR and risk rating qualifications.</li></ul> Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

McLane

CDL-A DELIVERY TRUCK DRIVER

Description Idaho National Laboratory is hiring a Security Systems Technician to work in our Physical Security Systems department. Our team works a 4x10 schedule located out of our Central Facilities and Materials and Fuels Complex with every Friday off. You will perform preventative maintenance (PM) work orders (WO), corrective maintenance WO’s, and modification installation WO’s for complex electronic intrusion detection, video assessment, access control, and other security equipment related work.&nbsp;You will report directly to the manager of the Physical Security Systems department. Responsibilities Include: <ul><li>Actively participate in INL briefings and post job reviews.</li><li>Ensure that only approved supplies, parts, and materials are used per the work package. Identify needed spare parts for PSS equipment.</li><li>Implement Physical Security Systems (PSS) equipment labeling practices following company and PSS procedures.&nbsp;</li><li>Comply with company standards for safety, quality, and efficiency. Identify potential hazards or unsafe conditions, which may include exercising “Stop Work Authority.”</li><li>Ensure that PSS drawings are maintained in an as-built condition by verifying that the actual physical configuration is depicted accurately on drawings.</li><li>Write work orders per INL work control for the team.</li><li>Conduct and document routine self-assessments.</li><li>Provide technical input and recommendations to co-workers, customers, management, engineering, and management relating to security equipment requirements and applications detailed in Safeguards and Security Program documents.</li><li>Ensure that only Materials and Test Equipment (M&amp;TE) with current and reliable calibration is used, when needed; that MT&amp;E used is of the proper type, range, accuracy, and tolerance to accomplish the function of determining conformance to specified requirements; and that M&amp;TE is calibrated and controlled as required.</li><li>Complete and maintain training, required reading and qualifications specified for assigned tasks.&nbsp;</li><li>Train and mentor junior Technicians as directed.</li></ul>Qualifications Minimum Requirements:&nbsp; <ul><li>Level 3: High school diploma, or equivalent, and 4 years of relevant experience.</li><li>Level 4: High school diploma, or equivalent, and 6 years of relevant experience.</li><li>This position requires the ability to obtain and maintain a Department of Energy "Q" clearance, which requires US Citizenship.&nbsp;</li></ul> Job Information:&nbsp; <ul><li>The pay range for this position is: Level 3 ($30.17/hr - $49.78) / Level 4 ($35.30/hr - $58.23/hr). At Idaho National Laboratory compensation decisions are determined using factors such as education, relevant experience, and other credentials.</li><li>You are required to show a demonstrated commitment to valuing diversity and contributing to an inclusive working environment.</li><li>TDP/HRP: Testing Designated Position/Human Reliability Program: You will be required to submit to a pre-employment drug screen and continued drug testing throughout the term of your employment.</li><li>Multi-Level: This is a multi-level posting and you will be placed at the appropriate level dependent on depth and breadth of proven experience and skills.</li></ul> Benefits: <ul><li>Medical, Dental, Vision, and Flexible Spending Accounts</li><li>401(k) with a 4.2% employer contribution and up to 4.8% match</li><li>Paid time off (personal leave)</li><li>Employee Education Program (tuition assistance)</li><li>Benefit eligibility subject multiple factors, including employment status and position classification.</li></ul> INL is a science-based, applied engineering national laboratory dedicated to supporting the U.S. Department of Energy’s mission in nuclear energy research, science, and national defense. With more than 5,000 scientists, researchers, and support staff, the laboratory works with national and international governments, universities and industry partners to discover new science and development technologies that underpin the nation’s nuclear and renewable energy, national security, and environmental missions. INL Mission Our mission is to discover, demonstrate and secure innovative nuclear energy solutions, other clean energy options and critical infrastructure. INL Vision Our vision is to change the world’s energy future and secure our nation’s critical infrastructure. Selective Service Requirements To be eligible for employment at INL males born after December 31, 1959 must have registered with the Selective Service System (SSS). For more information see <a href="http://www.sss.gov" target="_blank">www.sss.gov</a>. Equal Employment Opportunity Idaho National Laboratory (INL) is an Equal Employment Opportunity (EEO) employer. It is the policy of INL to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Women and People of Color are strongly encouraged to apply.&nbsp; Reasonable Accommodation We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Other Information When applying to positions please provide a resume and answer all questions on the following screens. Applicants, who fail to provide a resume or answer the questions, may be deemed ineligible for consideration. INL does not accept resumes from third party vendors unsolicited.

Security Systems Technician

Description Idaho National Laboratory is hiring a Radiological Control Technician to work in our Advanced Test Reactor (ATR) Radiological Controls Operations department. All work is performed on-site over multiple shifts at our ATR facility You will apply a diverse knowledge of radiological control principles, procedures, requirements and related instrumentation to support radiological control operations at ATR. You will report to the manager of the ATR Radiological Controls Operations department. Responsibilities Include: <ul><li>Perform required radiological surveys for free release of material from Radiological Buffer Areas and Contamination Areas. Complete personnel surveys for contamination, surveys for contamination control, radiation control, airborne radioactivity control, and surveys to categorize waste for shipment.&nbsp;</li><li>Provide radiological work coverage, radiological work/practice oversight and mentoring, write radiological control work permits (RWP), enforce radiological control requirements, and ensure ALARA principles are followed during work. Respond to radiological emergencies in compliance with procedures and GDEs.&nbsp;</li><li>Document and review, when applicable, radiological surveys and radiological information in logs and on survey maps.&nbsp;</li><li>Review and provide input for facility procedures concerning radiological control and ALARA implementation.&nbsp;</li><li>Help writing radiological procedures and provide instruction and guidance to junior technicians.&nbsp;</li><li>Maintain proficiency and qualifications in radiation and contamination control through completion of work, self-study, and training activities. Display an in-depth knowledge of Health Physics theory, work practices, and instrumentation.&nbsp;</li><li>Implement Laboratory Required Documents, Laboratory Wide Procedures, work rules, and safe work practices.&nbsp;</li><li>Support and use the established Integrated Safety Management System principles to ensure work is conducted safely and meets the requirements for Environmental, Safety, and Health.</li></ul>Qualifications Minimum Requirements:&nbsp; <ul><li>High school diploma, or equivalent, and a Technical Certification or equivalent in Radiation Protection.</li><li>You must either be currently DOE Core certified or successfully pass the DOE Core exam administered by BEA.</li><li>This position requires the ability to obtain and maintain a Department of Energy "L" clearance, which requires US Citizenship.&nbsp;</li></ul> Job Information:&nbsp; <ul><li>Starting Wages: Jr. RCT: $32.61/hour - RCT: $40.43/hour - Sr RCT: $45.98/hour. (Rates can vary based upon individual work location, clearances, qualifications, and certifications, such as NRRPT. Rates are accurate for current posting and subject to change. These are bargaining unit positions.)</li><li>ATR-Qualified wages: Jr. RCT: $33.26/hour - RCT: $41.23/hour- Sr RCT: $48.50/hour (Rates can vary based upon individual work location, clearances, qualifications, and certifications, such as NRRPT. Rates are accurate for current posting and subject to change. These are bargaining unit positions.)</li><li>You are required to show a demonstrated commitment to valuing diversity and contributing to an inclusive working environment.</li><li>TDP: This is a testing designated position; you will be required to submit to a pre-employment drug screen and periodic drug testing throughout the term of your employment.</li><li>Multi-Level: This is a multi-level posting and you will be placed at the appropriate level dependent on years of experience.&nbsp;</li></ul> Benefits: <ul><li>Medical, Dental, Vision, and Flexible Spending Accounts</li><li>401(k) with a 4.2% employer contribution and up to 4.8% match</li><li>Paid time off (personal leave)</li><li>Employee Education Program (tuition assistance)</li><li>Benefit eligibility subject multiple factors, including employment status and position classification.</li></ul> INL is a science-based, applied engineering national laboratory dedicated to supporting the U.S. Department of Energy’s mission in nuclear energy research, science, and national defense. With more than 5,000 scientists, researchers, and support staff, the laboratory works with national and international governments, universities and industry partners to discover new science and development technologies that underpin the nation’s nuclear and renewable energy, national security, and environmental missions. INL Mission Our mission is to discover, demonstrate and secure innovative nuclear energy solutions, other clean energy options and critical infrastructure. INL Vision Our vision is to change the world’s energy future and secure our nation’s critical infrastructure. Selective Service Requirements To be eligible for employment at INL males born after December 31, 1959 must have registered with the Selective Service System (SSS). For more information see <a href="http://www.sss.gov" target="_blank">www.sss.gov</a>. Equal Employment Opportunity Idaho National Laboratory (INL) is an Equal Employment Opportunity (EEO) employer. It is the policy of INL to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Women and People of Color are strongly encouraged to apply.&nbsp; Reasonable Accommodation We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Other Information When applying to positions please provide a resume and answer all questions on the following screens. Applicants, who fail to provide a resume or answer the questions, may be deemed ineligible for consideration. INL does not accept resumes from third party vendors unsolicited.

6 Technician Jobs in Idaho